The ZelenTech T-Series is a new range of insert Watercut Monitors (also known as BS&W, OWD, WFM or Water in Oil Analyzers) developed in-house
The T-Series is primarily designed for insertion into smaller pipes and specifically targeted at Well-Head applications where this type of meters are in common use. The ZT100 T=Series will fit in any 3/4 inch NPT socket previously used for other brands using similar designs.
The T-Series is inserted through a 3/4 inch NPT nipple and complements the I-Series insertion meters that is geared towards large pipes.
The ZelenTech ZT-100 Watercut Monitor determines the percent watercut in an oil emulsion without requiring the physical separation of the fluids. The emulsion stream is continuously monitored for capacitance and converted into percentage of water by the Watercut Monitor logic.
Inherits functionality and safety from the well proven ZT-100 F, S and I-Series.
Fully Blow-Out Proof Safe design.
Up to ANSI Class 600#
Retractable under pressure (available soon).
NEL, ATEX or GOST certifications available.
T-Series General Data
Principle of Operation
High Frequency Digital Capacitance
Temp Compensation Range
0°C – 180°C
4-20mA + HART
24VDC (Loop Powered)
+150° C (250 with High Temp Option)
IP66 / Nema 4X & 7
Up to Class 600#
Probe entry nozzle sizes
3/4 inch NPT
Line Sizes Nominal Sizes
2 or 3 inch or larger using adapter
316L (Optional Duplex, Monel or other steels)
Seals and electrical insulators
T-Series Mechanical Data
Wetted Steel Material
316L Standard (More exotic materials available)
Max. Working Pressure
Up to Class 600#
Max. Fluid Temperature
180°C Standard (240°C Optional)
Max. Ambient Temperature
3/4 inch NPT or 2 inch flanged adapter
The ZT-100 is available with a variety of certifications to suit different locations
EXD Class 1, Division 1
II 2 GD Ex d IIC T6÷T4 - Ex tD A21 IP 66/67 T85°C ÷ T135°C
Certified GOST EXD (Russia)
T-Series Configurations and Features
3/4 inch NPT Insertion Model:
Sits through elbows into 2 inch or 3 inch lines.
Suits larger pipes using adaptors
Qucik and simple setup
Compatible with existing 3/4 inch nozzles made for similar instrument designs