The ZelenTech I-Series is a new range of insert Watercut Monitors (also known as BS&W, OWD, WFM or Water in Oil Analyzers) developed in-house
The I-Series is inserted vertically into large lines through a 2 inch or 3 inch nozzle.
For smaller pipes also check out the F-Series and the new S-Series of water cut meters.
The ZelenTech ZT-100 Watercut Monitor determines the percent watercut in an oil emulsion without requiring the physical separation of the fluids. The emulsion stream is continuously monitored for capacitance and converted into percentage of water by the Watercut Monitor logic.
Inherits functionality and safety from the F-Series.
Fully Blow-Out Proof Safe design.
Up to ANSI Class 1500 or 250 barg.
Retractable under pressure.
NEL, ATEX or GOST certifications available.
ZelenTech ZT-100 Watercut Meters (BS & W, OWM)
Automatic Temp Comp
Optional Density Comp
HART + Modbus available
I-Series General Data
Principle of Operation
High Frequency Digital Capacitance
Resolution (Low Range)
Accuracy (Low Range)
Resolution (High Range)
Accuracy (High Range)
Max Water (Low Range)
Max Water (High Range)
Temp Compensation Range
>0°C – 180°C
4-20mA + HART
24VDC (Loop Powered)
+150° C (250 with High Temp Option)
IP66 / Nema 4X & 7
0-25% or 0-100%
Up to Class 1500#
Probe entry nozzle sizes
2 inch or 3 inch
Line Sizes Nominal Sizes
From 12 inch to 42 inch
316L (Optional Duplex, Monel or other steels)
Seals and electrical insulators
I-Series Mechanical Data
Wetted Steel Material
316L Standard (More exotic materials available)
Max. Working Pressure
Up to Class 1500#
Max. Fluid Temperature
180°C Standard (240°C Optional)
Max. Ambient Temperature
The ZT-100 is available with a variety of certifications to suit different locations
EXD Class 1, Division 1
II 2 GD Ex d IIC T6÷T4 - Ex tD A21 IP 66/67 T85°C ÷ T135°C